D Spanning-Tree Protocol (Stp); Menu: Configuring 802.1D Stp - HP ProCurve 5300xl Series Management Manual

802.1D Spanning-Tree Protocol (STP)

Menu: Configuring 802.1D STP

1. From the Main Menu, select:
2. Switch Configuration ...
4. Spanning Tree Operation
Figure 6-6. The Default "Spanning Tree Operation" Screen
2. Press
configuration this field is set to RSTP.
3. Press the Space bar once to change the field to STP. This changes the
Protocol Version selection to the 802.1D Spanning Tree Protocol.
4. Press
5. Press the Space bar to select Yes. (Yes in this field means to enable
spanning-tree operation.)
(for ) to highlight the Protocol Version field. In the default
[E] Edit
[v]
to highlight the STP Enabled field.

802.1D Spanning-Tree Protocol (STP)

Use this field to select the 802.1D version of STP.
Spanning-Tree Operation
6-21