PRESONUS AudioBox Stereo Quick Start Manual page 350

14.1.4 Loop a Sample
To loop playback of a sample, click on the Loop button above the main display. A Loop Range
display will appear above the sample waveform, indicating the section of the sample to be
looped. Any range of the sample can be looped. If the loop range begins after the initial
playback range begins, the sample will play from the beginning of the playback-range
position to the end of the loop-range position; then it will play from the start of the loop range
to the end of the loop range and back for as long as the sample is triggered.
14.1.5 Change Root Note and Keymap Range
To change the Root note, click-and-drag the root-note handle (displayed immediately above
the keyboard display, C3 by default) left or right across the keyboard display. The notes on
your keyboard that will trigger the sample are indicated in the Keymap Range display, which is
the blue bar extending to the right and left of the note handle. To restrict the range of notes
that will trigger the sample, click-and-drag on the left or right edge of the Keymap Range
display.
14.1.6 Playing Multiple Samples
Up to 96 samples can be loaded into SampleOne at once, with each loaded sample displayed
in the sample list. Select any sample in the list to edit its playback, loop, and keymap range, as
well as its root note and loop status. All loaded samples will be triggered simultaneously,
depending on the keymap range for each sample. For instance, if C3 on your keyboard is set to
trigger every sample, pressing C3 will trigger every sample at once. In this way, multilayered,
or multitimbral sample-playback can be achieved.
Note that the amplifier envelope, filter envelope, and LFO are global and affect the overall
output of SampleOne.
14.1.7 Replace a Sample
To replace a sample in SampleOne, select, in the sample list, the sample that you wish to
replace. Then drag any audio clip from the Browser, or any Audio Event from the Arrange view,
into the main display. The sample will replace the previous one in the sample list, and the
previously displayed sample waveform will be updated to reflect the new sample.
232