PRESONUS AudioBox Stereo Quick Start Manual page 340

o
Height. Adjusts the height relative to size. Variable from 0.1 to 1.
• Geometry.
o
Dist. Adjusts the relative distance between the source and the listener position
within the virtual room. Variable from 0.1 to 1.
o
Asy. Adjusts the left and right asymmetry between the source and the listener
position. Variable from -1 (listener position far right) to 1 (listener position far left).
o
Plane. Adjusts the relative height of the stereo source and listener position within
the virtual room. Variable from 0 (half the height of the room) to 1 (ceiling).
• Room Model. Select a synthetic reverb model: Small Room, Room, Medium Hall, and
Large Hall.
o
W, D, H Display. Displays approximate room-dimension values based on current
Room settings.
• Character.
o
Population. Adjusts the relative population of people in the virtual room. Variable
from 0 to 1.
o
Value of 0 results in enhanced bass, "static" tail.
o
Value of 1 results in attenuated bass, "moving" tail.
o
Dampness. Adjusts the relative humidity of the air in the room. This has the effect
of attenuating the upper frequencies of the reverberated signal. Variable from 0 to
1.
• Reflexivity. Adjusts the relative smoothness of the surfaces of the virtual room.
Variable from 0 to 1. Higher values evoke a more echo-like reverb tail.
• Reverb Mix. Adjust the mix of the reverb tail and early reflections. Variable from 0 to 1.
Reverb display is updated to indicate this mix.
• Send Mix. Adjust the mix of the MixVerb-processed signal with the original dry signal.
Variable from 0 to 100%.
• Perform/Quality. Quality mode is selected by default. Engage Perform mode
(economy performance mode) to use fewer CPU resources by disabling floor and
ceiling reflections and reducing the calculation accuracy for the reverberation.
222