Move An Automation Point; Delete An Automation Point; Editing Multiple Points At Once - PRESONUS AudioBox Stereo Quick Start Manual

10.3.3 Move an Automation Point

To move any point on an automation envelope, using the Arrow tool, click-and-hold on any
existing point on the envelope. While holding the click, moving the selected point vertically
changes its parameter value, and moving the point horizontally changes its time position.
When moving an automation point, notice the pop-up value indicator. This displays the
current parameter value. The range and the type of value depend on the parameter being
automated and on the current time value displayed in the Timebase selected in the Arrange
view.
In Studio One, you can drag an automation point as far beyond the position of other
automation points as needed. Moving an automation point beyond other points on the
envelope will cause the other points to move as well. The other points being moved will be
restored to their original positions on the timeline if the point that caused them to be moved
is moved back beyond their original positions.
Note that when Audio Events or Instrument Parts are moved, any underlying track automation
will be moved along with the events, by default. To disengage this option, see the
Options/Advanced/Editing/Tools menu and uncheck the Automation Follows Events option.

10.3.4 Delete an Automation Point

To delete an existing point on an automation envelope using the Arrow tool, first click on a
point to select it. Then, press [Delete] on the keyboard to delete the point. Alternatively,
[Right]/[Control]-click on any automation point and select Delete from the pop-up menu to
delete it.

10.3.5 Editing Multiple Points at Once

It is possible to simultaneously edit any number of points on an automation envelope. Using
the Arrow tool, click in the Track Lane, away from any existing automation point, and then
drag to draw a selection box around the points you want to edit. With multiple points
selected, click-and-drag, using the Arrow tool, on any of the selected points, in order to move
them all. Moving multiple points vertically to adjust the parameter values will adjust each
parameter value relative to the point being moved.
10.3.6 Paint Tool
Editing an automation envelope with the Paint tool allows you to draw many automation
points with a single move of the mouse, effectively painting an envelope. You can choose
from several figures when using the Paint tool or you can use the Transform editor. Be sure to
Show Automation and select the Paint tool in the Arrange view before attempting the
following processes.
156