PRESONUS AudioBox Stereo Quick Start Manual page 278

10.5.2 View Part Automation
To view and edit Part automation for an Instrument Part, select the desired Instrument Part
and open the Edit view by pressing [F2] on the keyboard, double-clicking on the Instrument
Part, or clicking on the Edit button.
Below the Music Editor (which shows the musical notes for the selected Instrument Part), you
will notice the Part Automation lane. At the upper left of the lane, the Parameter tab shows the
parameter currently displayed in the lane.
10.5.3 Manually Add and Edit a Part-Automation Envelope
Click on the Parameter tab to choose a parameter to view and edit in the Part Automation
Lane. By default, Velocity, Modulation, Pitch Bend, and Aftertouch (Pressure) are available.
To add a new automation envelope to the Part Automation lane, select Add/Remove from the
list to open the Automation menu. This menu is identical to the Automation menu mentioned
in the Automation Envelopes on the Track section of this chapter.
Alternatively, you can edit the parameter of the desired instrument, then click on the hand
icon in the top left parameter window and drag the parameter to the Music Editor to add a
Part Automation envelope for that parameter to the Instrument Part.
The parameters that you can add to the Part Automation lane are based on the virtual
instrument to which the Instrument Track that contains the selected Instrument Part is
connected. Only those parameters for which an automation envelope does not already exist
will be available.
160