o
Output Level. Displays output level + RMS.
•
Input Gain. Attenuates or amplifies the compressor input. Variable from -12
dB to 24 dB.
Auto-Gain. Engage to automatically fix the 0 dB input level to the 0 dB
output level (guarantees a 0 dB input level will result in a 0 dB output
level). When Auto is not engaged, Gain (output gain) is variable from 0 dB
to 48 dB.
•
Attack. Adjusts attack time for dynamics processing. Variable from 0.1 ms to
400 ms.
•
Release. Adjusts release time for dynamics processing. Variable from 1 ms to
2s.
•
Speed.
o
Auto. Engage Auto to automatically set varying attack and release settings
based on signal content.
o
Adaptive. Engage to automatically vary attack and release times in order
to avoid pumping. This will result in less-aggressive but smoother
compression.
•
Sidechain. Engage by clicking Sidechain button at the top of the effect
window to allow other sources to control the Compressor or use the internal
filter sidechain.
o
Sidechain Channel Display. Displays the current sidechain channel
source.
202
o
Ratio. Click the top right handle to adjust when Auto-Gain is not
engaged.
o
Threshold. Click the middle handle to adjust when Auto-Gain is
not engaged.
o
Knee. Use the mouse wheel while floating the cursor over the
middle handle to adjust when Auto-Gain is not engaged. If you
don't have a mouse wheel, type in a value or use the Knee knob.
o
Gain. Click the bottom left handle to adjust when Auto-Gain is not
engaged.
o
Auto-Gain Engaged. Click on the middle handle to adjust all
parameters.