PRESONUS AudioBox Stereo Quick Start Manual page 254

9.2.18 Store a Preset
To store a preset containing the current settings of an effect, click on the Store Preset button
and choose Store Preset. Type a name for the preset in the pop-up menu and click OK to store
the preset.
To replace an existing preset, select Replace Preset from the pop-up menu. The settings for the
preset currently displayed in the Preset window will be replaced with the current settings of
the effect.
You can also store any effect or Instrument preset by dragging-and-dropping the insert effect
or instrument from the Console to the Browser. If dragged to a location in the File Browser, the
preset will be stored in that location. If dragged to the Effects or Instruments Browser, the
preset will be stored in your User Data location (as set in the Studio One/Options/ Locations
menu) and will become available in the preset dropdown lists of the Browser and effect or
Instrument.
9.2.19 Store a Default Preset
It is possible to store the current settings of an effect as a default preset so that the effect will
open with these settings when loaded in a Song. To store a default preset for any effect, click
on the Store Preset button and select Store as Default
9.2.20 Use Presets to Build a Unique Sound
Studio One's preset system is very easy to use. If you take the time to load plug-in presets and
tweak them even a little bit, then save your personalized sounds as unique presets in Studio
One, you can build a distinctive library. After that, you can quickly locate your custom presets
in the Browser; no digging through every preset just to find the one you want.
9.2.21 FX Chains
You may wish to insert certain combinations of effects together on a channel. For instance,
you might regularly apply a compressor, EQ, and chorus to your vocal tracks.
In Studio One, FX Chains are used to save the exact setup of an Insert Device Rack so that the
entire chain of effects, including all settings, can be recalled instantly. To create an FX Chain:
Configure an Insert Device Rack on a channel with the desired effects and settings.
•
Click on the menu arrow at the top of the Insert Device Rack, next to the Insert label,
•
and select Store FX Chain from the pop-up menu.
Type in a unique name for the FX Chain and click OK or press [Enter] on the keyboard.
•
Alternatively, you can drag and drop the Insert Device Rack header to the Effects Browser to
instantly create an FX Chain with the name of the channel.
136
Preset.