PRESONUS AudioBox Stereo Quick Start Manual page 209

Press and hold [Alt] on the keyboard with the Paint tool selected to enter Line Drawing mode.
In this mode, you can draw a line of note Events in the Music Editor, and you can draw lines in
automation envelopes, as discussed later in this manual.
To momentarily select the Arrow tool while using the Paint tool, hold [Ctrl]/[Cmd] on the
keyboard.
6.12.2.5 Eraser Tool
The Eraser tool in the Music Editor is used to delete notes. With the Eraser tool selected, click
directly on any note to delete it.
6.12.2.6 Mute Tool
The Mute tool is used in the Music Editor much as it is used in the Arrange view. With the Mute
tool selected, click on any note to mute it, and click on any muted note to unmute it. Click and
drag over any number of notes in one motion to mute or unmute the entire group of notes.
6.12.2.7 Cut, Copy, Paste, and Duplicate Notes
You can cut, copy, paste, and duplicate notes exactly as you can with Events in the Arrange
view, as describe in the
cut or copy notes and then paste them directly into the Arrangement onto a selected
Instrument Track.
6.12.2.8 Transposing Notes, Instrument Parts, and Tracks
Transposing notes, or changing a group of notes by a given interval, is a common action that
takes advantage of the flexibility of musical data. It is possible at any time to transpose notes, a
whole Instrument Part, or all of the contents of an Instrument Track.
To transpose a note or group of notes within an Instrument Part, open the Music Editor by
double-clicking on the desired Part, and do the following:
• Select all of the notes you wish to transpose.
• Select Transpose from the Musical Functions submenu.
• Choose from one of the preset transpositions or use the horizontal fader to set the
number of semitones by which the selected notes will be transposed. A positive
number results in the notes being transposed up, and a negative number results in the
notes being transposed down.
To transpose an entire Instrument Part:
• Select the Part you wish to Transpose in the Arrange view.
• Select Transpose from the Event menu.
91
Common Editing Actions section of this chapter. It is also possible to