5.1.2 Use and Create Presets
In Studio One, you can store presets of an entire chain of effects plug-ins as an FX Chain,
allowing quick recall of complex effects setups on any track. Any factory-preset or user-created
FX Chain can be selected as a Preset when creating a track. For more information, refer to the
FX Chain section of the "Mixing" chapter.
5.1.3 Configuring an Audio Track
This section describes the editable Audio Track parameters.
5.1.3.1 Input/Output Selection
An Audio Track's I/O channel(s) can be selected from three places: the Track Column, the
Console, and the Track Inspector.
Selecting an Input Channel from the Track Column:
•
Set the Arrange view Track size to medium or larger to be able to access the current
Input Channel selection for any track.
•
Click in the window immediately below the horizontal track fader to choose from any
configured Input Channel.
Selecting an Input or Output Channel from the Console:
•
Open the Console by clicking the Mix button, or press [F3] on the keyboard, and be
sure either All Channels or Audio is selected in the Banks window.
•
Click in the window above each track's Fader and Pan controls to choose an Input
and/or Output Channel. The Input Channel selector is on top, with the Output Channel
selector beneath.
Selecting an Input or Output Channel from the Inspector:
•
Open the Inspector window by clicking on the Inspector button above the Track
Column or pressing [F4] on the keyboard.
•
In the channel area of the Inspector window, you will find the currently selected track's
Channel Mode toggle (mono or stereo) and Input and Output Channel selectors.
•
Click on the Input or Output Channel selector to choose a channel.
Stereo Tracks can select from both mono and stereo Input Channels, while Mono Tracks can
only select from mono Input Channels.
39