Removing The Control Cooling Fan Motor - Whirlpool Polara GR556LRK Service Manual

REMOVING THE CONTROL COOLING FAN MOTOR

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
NOTE: There are two methods for removing
the control cooling fan motor. The first method
is to remove the left side panel, as shown
below, and the second is to remove the refrig-
eration module. Use whichever procedure best
suits your needs.
2. Remove the left side panel from the refrig-
erated range (see steps 4a through 4e on
page 4-11 for the procedure), or remove
the refrigeration cooling module (see page
4-26 for the procedure).
Control Cooling Fan Motor
(Viewed From Left Side Of Unit)
3. Remove the front and rear screws from
the control cooling fan motor cover. NOTE:
Use a magnetized screwdriver for this
operation.
Control Cooling Fan Motor Cover
4. Disconnect the two wires from the control
cooling fan motor terminals.
5. Unhook the control cooling fan motor cover
from the unit and remove it.
4-18
Front Screw Rear Screw
Unhook Cover
Control
Cooling Fan
Motor Wires