10. Remove the two lower screws from the
condenser fan shroud.
Condenser
Fan Shroud
Screw
Condenser Fan Shroud Screw
11. Disconnect the evaporator & condenser
fan motor connector from the harness.
Evaporator & Condenser
Fan Motor Connector
12. Slide the evaporator & condenser fan motor
assembly forward and remove the grom-
met from the slot, then lift the assembly
from the unit.
13. Remove the condenser fan shroud and
place the evaporator & condenser fan
motor assembly on a protected work sur-
face.
Remove Grommet
From Slot
Evaporator & Condenser
Fan Motor Assembly
Continued on the next page.
4-31
Condenser Fan Shroud