Removing The Bimetals And The Evaporator - Whirlpool Polara GR556LRK Service Manual

REMOVING THE BIMETALS AND THE EVAPORATOR

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Remove the cooling module from the unit
(see page 4-26 for the procedure).
3. Remove the metal baffle from the module
(see page 4-28 for the procedure).
4. Remove the two insulation block sections
from the evaporator (see page 4-28 for the
procedure).
5. Remove the ten screws from the top cover
of the evaporator and remove the cover.
Evaporator Cover With 10 Screws
6. Remove the two bottom flange screws
from the evaporator air outlet cover.
Bottom Flange Screws
Of Air Outlet Cover
7. Remove the five screws from the left and
right sides of the air outlet cover and
remove the cover.
Remove Screws (1 of 5)
Continued on the next page.
4-33
Air Outlet Cover