Whirlpool Polara GR556LRK Service Manual page 83

To program the first step of the sequence:
• Press the FIRST STEP/NEXT STEP key-
pad. "PROGRAM" and "STEP" will ap-
pear on the display. A flashing "1" will also
appear on the display, indicating that step
1 is being programmed.
• Choose the desired Cook function. For
example: press the COOL keypad.
• Press the START TIME keypad.
• Press the HR and MIN up (s) or down
(t) keypads, and set the time-of-day for
the first Cook function to begin. NOTE: If
the START TIME keypad is not pressed,
then the sequence of Cook functions will
begin immediately once programming is
complete, and the START keypad is
pressed.
• Press the STOP TIME keypad.
• Press the HR and MIN up (s) or down
(t) keypads, and set the time-of-day for
the first Cook function to stop. The dis-
play will show either the time-of-day, (if
start time was not programmed), or the
start time, (if that time was programmed),
but with a flashing colon(:). "Stop" and
"Time" will also appear on the display.
NOTE: When programming a COOL func-
tion as part of a sequence, COOL must
be programmed as the first step.
To program the next steps of the sequence:
• Press the FIRST STEP/NEXT STEP key-
pad. "PROGRAM" and "STEP" will ap-
pear on the display. The number of the
step being programmed will flash.
"START " and "TIME " will appear on the
display.
• Choose the desired Cook function. For
example: press the BAKE keypad.
• Press the TEMP up (s) or down (t) key-
pads, (if desired), to select the tempera-
ture.
• Press the STOP TIME keypad.
• Press the HR and MIN up (s) or down
(t) keypads and select the stop time.
• Press the START keypad to begin the
sequence once all of the steps have been
programmed.
• Press the STOP CANCEL keypad at any
time to clear or to stop the program.
Continue to repeat the previous steps until up
to all four Cook functions are programmed.
To review/modify a programmed sequence:
If the program steps are partially or completely
programmed, and the sequence has not been
started, the programmed Cook functions can
be reviewed and modified, if desired.
• Press the REVIEW STEPS keypad. Step
1 will appear in the display. NOTE: Each
time the REVIEW STEPS keypad is
pressed, the steps will be displayed in se-
quence.
"STEP" and "RECALL" will appear on the
display. The number of the displayed step
will flash. A recalled step will remain lit on
the display for 5 minutes if no further ac-
tion is taken.
• If fewer than four steps have been pro-
grammed, press the REVIEW STEPS
keypad repeatedly, until the last pro-
grammed step is displayed, then press
the FIRST STEP/NEXT STEP keypad to
program an additional step.
While a step is recalled, a Cook function
keypad can be used to change the func-
tion, or the TEMPERATURE up (s) or
down (t) keypads can be used to change
the set temperature.
The START TIME keypad, in combination
with the HR or MIN up (s) or down (t)
keypads, can be used to change, add, or
delete a delayed start.
The STOP TIME keypad can be used to
change the stop time. Changing the stop
time of a step will automatically change
the start and stop times of all subsequent
programmed Cook functions.
8-3