Answering Calls - Mitel 5320 Reference Manual

5212-5312/5224/5320-5320e/5324/5330-5330E/5340-5340e/ and 5360e
Phones
To activate a phone you need
• an extension
• a phone,
• a PIN.
The administrator can provide you with an extension and an initial PIN.
To activate your phone, follow these steps:
1. Disconnect your computer from the network.
2. Plug the phone into the network.
3. Plug the computer into the phone at the port marked PC.
4. Connect one end of the phone power pack into your phone and the other end into a
power outlet.
If your network is configured with Power Over Ethernet (POE), the above step is not
necessary.
5. Wait for the Information Display Area to show "Logged Out" (this may take 30
seconds or more):
6. Press ACTIVATE.
The Information Display Area prompts you for your Extension:
7. Enter your extension.
8. If you have login/logout privileges, the Information Display Area prompts you for
your PIN:
9. Enter your PIN, then press ENTER.
You have now successfully activated the phone, and can make calls.
See Quick Set-up for information about initial settings you should configure through the
web interface.

Answering Calls

When an incoming call is received on a phone, several things happen:
1. the phone rings
2. a Line Appearance flashes
3. the LCD displays the phone number of the caller and, if known, the name of the
caller
32
Mitel IP Phone Reference Guide
Using Phones