Dynamic Site; Create A Dynamic Site - Mitel 5320 Reference Manual

My Dynamic Site
If you have the dynamic site capability enabled for you, you can use the My Dynamic
Site page to perform the following tasks:
• Create a dynamic site. See
• Release a dynamic site. See
• View current dynamic site information. See

Dynamic Site

The Dynamic Site Support feature allows telephone users to create their own dynamic
site from any location with an IP connection to the service provider. The service provider
can provision this capability for any telephone user. Your company administrator cannot
provision this capability. Once you have created a dynamic site, you can then log in to
your phone at that site as if you were in the office.
If this capability is enabled, you will be presented with an extra web page -- My
Dynamic Site on the web interface. By logging in to the web interface and selecting
this new page, you will then be presented with the option to create a dynamic site or
to release one. This capability requires that you have a specially configured phone
provided by your service provider.
When you select the button to create a dynamic site, the system automatically detects
the router to which your PC is connected and then provisions a site using that router
address. You then re-boot your phone (disconnect and reconnect the power). It will
obtain an IP address locally and then register with the phone service using the newly
created dynamic site. The site persists as long as you are connected. If your phone is
disconnected, the site will persist for a certain amount of time (typically 1 hour after the
phone is disconnected and a minimum of 2 hours after the site was created).
When you select the button to release a dynamic site, the system deletes that site and
logs out any user logged in at that site. You will not be able to log in to a phone at the
site until you re-create the site.
For information purposes, the My Dynamic Site page displays the IP address of your
computer. It also displays the IP address of the dynamic site (the router address) if you
have created one.

Create a Dynamic Site

To create a dynamic site, follow these steps:
1. Click My Dynamic Site in the left menu.
2. Click Create Dynamic Site.
98
Create a Dynamic Site.
Release a Dynamic
View Dynamic Site
Personalizing Phone Usage through the Web
Mitel IP Phone Reference Guide
Site.
Information.