Placing Calls; Answering Calls - Mitel MiVoice 6930 User Manual

Mitel 6930 IP Phone User Guide for MiCloud Connect
• Auto Answer
• Sending an incoming call to voicemail
• Adjusting the ring and listening volume
• Turning off the phone's ringer
• Muting a call
• MobileLink

Placing Calls

To place a call, you can use the handset, the speakerphone, or a headset.
Note: The call timer on the 6930 IP phone starts after the call is answered.
Using The Handset To Place A Call
1. To place a call, pick up the handset and dial a phone number.
2. To end the call, hang up the handset.
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the handset or headset. Your
phone must be in either the Speaker or Speaker/Headset audio mode. For more information about
setting the audio mode on your phone, see
• To dial using handsfree, first press
• If you are in Speaker audio mode, lift the handset and press
and handset.
• If you are in Speaker/Headset audio mode, press
headset.
• When the handset is on hook, press
Note: When handsfree is on, the LED next to the hardkey turns on.
Using The Headset To Place A Call
1. To place a call using the headset, press
The LED next to the hardkey blinks red, and the call is dialed.
2. To end the call, press the
The LED next to the hardkey stops blinking.

Answering Calls

When a call is ringing at your extension, the inbound caller's name, extension, picture ID (if
applicable), and incoming call icon display on the screen. Additionally, the line/call appearance LED
flashes quickly indicating the incoming call.
12
Audio on page 51
and enter a number at the dial tone.
to disconnect the call.
and dial the phone number.
button again.
.
to switch between handsfree
to switch between handsfree and