Handsfree Answerback; Hold; Hold Notification - Mitel 5320 Reference Manual

Handsfree answerback

Using Handsfree answerback, you can have intercom calls automatically answered so
that you have a two-way speech connection. See
Press Handsfree answerback to turn the feature on. Press the key a second time to
turn the feature off. The LED on the programmed key indicates when the Handsfree
answerback feature is turned on.
To be able to activate and deactivate this feature with a key, you must have a key
programmed with Handsfree answerback. See
You can also enable the feature without a key by checking the box for Handsfree
Answerback on your Personal Details page (see

Hold

Using Hold, you can put an active call on hold, and make other calls. The LED of the
Line Appearance key flashes to indicate the call is on hold.
To place a call on hold, follow these steps:
1. While on an active call, press Hold or another Line Appearance.
2. The indicator light next to the active Line Appearance changes from green to red
and/or flashes slowly.
3. To remove the call from hold, press (the original) Line Appearance.

Hold Notification

Hold Notification provides both audible and visible reminders that you have a call on
hold on MiNET phones. Reminders—audible "beep beeps" through the handset or
speakerphone and Call(s) on Hold splashed on the phone display—are sent when you
have one or more calls on hold.
The interval between reminders is configurable through the System Properties page.
To configure the Hold Notification Interval, follow these steps:
1. Click System Properties in the left menu.
2. Scroll down to Hold Notification Interval and enter a value in seconds.
The default value is 30 seconds.
56
Mitel IP Phone Reference Guide
Intercom to Co-worker.
Programmable Memory Key
Change User Details).
Features.
Using Phone Features