Internal Phone Settings; Line Appearance; Mute - Mitel 5320 Reference Manual

To use this feature, you must have a key programmed withIntercom to Prompt. See
Programmable Memory Key Features

Internal Phone Settings

To configure internal phone settings (such as display brightness and contrast), select the
Superkey and follow the prompts.

Line Appearance

Line Appearance keys are required in order to receive incoming calls and to make
outgoing calls. The LED on the programmed key indicates the status of the Line
Appearance.
• Key is unlit: the Line Appearance is available for an incoming or outgoing
call.
• Key is flashing green with a ring tone: an incoming call is available to be
answered.
• Key is flashing red without a ring tone: a call is on hold.
• Key is solid: a call is active. If this is green, then a call is active. If this is red,
then a twinned call is active on the twinned target phone.
When you have multiple Line Appearance keys, they are ordered from bottom to top,
right to left. An incoming call appears on the first available Line Appearance.
Your phone will normally have two or three pre-programmed Line Appearance keys. To
be able to handle more simultaneous calls, you must program additional keys with Line
Appearance. See Programmable Memory Key
You can only program Line Appearance keys on page one of the three
programmable pages.

Mute

Using Mute, you can silence any sound from the phone. This does not prevent incoming
sound from being heard. Press
during a call to activate Mute. The LED on the key indicates when Mute is active.
Since the 5304 phone does not have a handsfree microphone, the phone is
effectively muted (no sound is transmitted to the other party) whenever the handset
is on-hook. This does not prevent incoming sound from being heard.
58
Mitel IP Phone Reference Guide
Features.
Using Phone Features