Call Lists - Mitel 5320 Reference Manual

Mitel IP Phone Reference Guide
Only the administrator can add a call group, or change the members of an existing
call group.
You can be a primary or secondary member of Monitor and Pickup groups;
however, SIP phones do not ring when you are a secondary member.
Join and Leave Call Groups
You can join and leave call groups that you are a member of if the call group has been
configured to allow joining and leaving. For Broadcast, Hunt and Rollover groups, only
the phones of members who are joined in the group will ring when the call group is
called. For Call Pickup groups, other phones in the group will be notified only if the
phone being called is joined in the group.
To join or leave a call group that you are a member of using the web interface, follow
these steps:
1. Select My Call Groups in the Navigation pane.
Your status for each call group is displayed in the Status column.
2. Select In Group to leave or Out of Group to join.
◦
Join and leave steps apply to Broadcast, Call Pickup, Hunt and Rollover
groups only.
◦
If your status is not displayed as a link, it means that you do not have
permission to leave the call group. Selecting this status will not cause a
change. See the administrator.
◦
You can also join or leave a call group (except monitor groups) via a
programmed join/leave memory key on your phone.

Call Lists

Call list keeps a list of the calls that you make and receive. The call list is accessible
from your phone. You can redial any calls that you made from the call list. See Redial.
You may be able to dial a number from your incoming call list if it is supported by your
service provider.
Since softkeys are not available on 5212/5312 and 5304 phones, you must first
have one of your programmable memory keys programmed as an Incoming
Calls List key and another programmed as Redial List/Dial. (See
Memory Key Features.)
Using Phone Features
Programmable
39