Redial; Volume Control - Mitel 5320 Reference Manual

Mitel IP Phone Reference Guide

Redial

Using Redial, you can view a list of calls that were made and also redial a number in
that list without using the keypad. The maximum amount of numbers in your redial list is
typically ten but is dependant on your Service Provider.
Since softkeys are not available on 5212/5312 and 5304 phones, you must first
have one of your programmable memory keys programmed as Redial List/Dial.
(See Programmable Memory Key
To use Redial, follow these steps:
1. Press REDIAL .
The system displays the most recently dialed number.
2. Use Scroll to navigate the list (if required).
3. Press TIME to display the time and date of the call.
4. Press NUMBER to display the number dialed.
5. Once the required number is displayed, press DIAL or Redial to make the call.
The next available Line Appearance is selected and you will hear ringing once the
number has been dialed.
◦
The asterisk [*] beside the position number means that the call was not
answered.
◦
The position of the call in the call list is displayed in front of the phone
number.
◦
Press QUIT or Cancel to exit from the call list .

Volume Control

You can use volume control to
• Change Ring Volume
• Change Handset Volume
• Change Speaker Volume on
5320-5320GigE/5330-5330GigE/5340-5340GigE/5360 Phones
The ring, handset, and speaker volumes return to their default settings if the phone
loses power.
Using Phone Features
Features.)
61