Using The Handset; Using The Speakerphone; Switch From Speakerphone To Handset - Mitel 5320 Reference Manual

Mitel IP Phone Reference Guide
Answer an incoming call by picking up the handset, pressing the flashing Line
Appearance, pressing ANSWER, or by pressing Speaker.

Using the Handset

To answer your phone using the handset, follow these steps:
1. Lift the handset, press the Line Appearance, or press Speaker.
If you choose to ignore the incoming call and select a different Line Appearance,
the line appearance continues to flash but the phone stops ringing.
2. To end the call while using the handset, choose one of the following:
• Press END.
• Replace the handset.

Using the Speakerphone

To switch from the handset to the speakerphone during a call, follow these steps:
1. Press Speaker.
2. Replace the handset
To end a call while using the speakerphone, choose one of the following:
1. Press END. (5320-5320GigE/5330-5330GigE/5340-5340GigE/5360 and 5224/5324
only)
2. Press Speaker.
There is no microphone on the 5304 set (only in the handset), so you are effectively
muted.

Switch from Speakerphone to Handset

To switch from the speakerphone to the handset during a call, pick up the handset.
To end the call while using the handset, choose one of the following:
• Press END (5320-5320GigE/5330-5330GigE/5340-5340GigE/5360 and
5212/5312 only).
• Replace the handset.
Using Phones 33