Standard Seat - Invacare Bora XTR Series Service Manual

SERVICE MANUAL
9.2.1

Standard seat

Requirements:
· 4 mm Allen wrench
· 5 mm Allen wrench
· 13 mm open-ended wrench
· Flat screwdriver
· Smal hammer
WARNING: Danger of crushing!
The seat is very heavy. Danger of injury to hands and feet!
· Pay attention to the hand and feet.
· Use proper lifting techniques.
The pictures show the standard seat without
seat covering from above (A) and below (B).
· Rear bolts (1)
· Front bolts (2)
· Seat plate (3)
· Seat frame (4)
The seat plate can be fixed in three different
positions on the seat frame.
· Front fixing (V)
· Centre fixing (M)
· Rear fixing (H)
130
® ®
Invacare - Bora /Spectra
®
XTR Series