Invacare Bora XTR Series Service Manual page 55

® ®
Invacare - Bora /Spectra
· Remove all plugs (1) from the electronics
module.
· Mark the positions of individual plugs for later
reassembly.
· Loosen the screws (1) on both sides of the
electronics module with the Phillips
screwdriver and remove them.
· Remove the electronics module.
· Reassembly of the electronics module takes
place in reverse order.
· Update the drive program if a new software
version is available as described in Chapter
7.6.
· Adapt the drive program using the
programming software if necessary.
· To complete, check all vehicle functions.
®
XTR Series SERVICE MANUAL
55