Invacare Bora XTR Series Service Manual page 114

SERVICE MANUAL
· Loosen and remove the screws of the seat
frame adjustment (A) with a T40 Torx
wrench.
· Loosen and remove the screws of the
fixation of the legrest mounting brackets
(B).
· Adjust the seat frame and the legrest fixation to the desired width according to the following
illustrations and tables:
Seat frame:
Screw position
A
B
C
D
Leg supports connection:
Screw position
A
B
C
D
Note
When switching from 430 mm to
480 mm and the other way around,
the fixation of the legrests must be
replaced.
· Reposition the screws and tighten them again.
· Install the seat plate or the sling seat.
· Reposition the seat cushion.
114
Seat width
530 mm
480 mm
430 mm
380 mm
Seat width
380 mm
430 mm
480 mm
530 mm
® ®
Invacare - Bora /Spectra
®
XTR Series