Simple Seat - Invacare Bora XTR Series Service Manual

SERVICE MANUAL
9.2.3.2

Simple seat

Requirements:
· 6 mm Allen key
· Remove the seat plate (1) or the sling seat, see chapter 7.21.1.
· Loosen the socket head screws (2) in the front and rear, left and right – DO NOT remove.
· Shift the position of the seat frame.
· Re-tighten the screws.
· Install the seat plate again.
136
® ®
Invacare - Bora /Spectra
®
XTR Series