Table of Contents
Advertisement
®
®
Invacare
- Bora
/Spectra
7.19.6 Backrest actuator - Removing the adapter
The Modulite seat is shipped ex works with an adapter on the backrest actuator, which allows a
backrest angle of 75 to 105 degrees. This is done for safety reasons, in order to ensure tipping
stability in cases of heavy user weight or tall users with a corresponding shift in their center of
gravity.
Smaller or lighter users can use the full range of backrest angles from 90 to 120 degrees.
The adapter (1) must be removed to allow this.
Note
The tipping stability must be checked afterwards, to determine the safety and stability of the
electric wheelchair. See chapter 9.3.
·
Slide the bolts (6) to the side using the lever (5) and tilt the actuator out of the upper bracket.
·
SL fuse (2) incl. Remove the washer (3) of the fixation bolt (4).
·
Pull the fixing bolt (4) out.
·
Remove adapter (1).
®
XTR Series
SERVICE MANUAL
109
Advertisement
Table of Contents
