Invacare Bora XTR Series Service Manual page 68

SERVICE MANUAL
· Loosen the battery terminal clamps (1) with the
Phillips screwdriver.
· First undo the screw on the negative terminal
(black cable) with the Phillips screwdriver.
· After this, undo the bolt on the positive
terminal (red cable).
· Reassembly of the batteries takes place in
reverse order
· Ensure that the battery cage sockets/plugs
have been correctly refitted. A polarity diagram
is located in each battery case cover.
· Front battery
· The battery case socket is located at the front
(flange central).
· Socket side A is on the left in the direction of
travel.
· Socket side B is on the right in the direction of
travel.
· The battery case plug is located at the rear
(flange flush).
· Plug side A is on the left in the direction of
travel.
· Plug side B is on the right in the direction of
travel.
· Rear battery
· The battery case socket is located at the front
(flange central).
· Socket side A is on the left in the direction of
travel.
· Socket side B is on the right in the direction of
travel.
68
® ®
Invacare - Bora /Spectra
®
XTR Series