Invacare Bora XTR Series Service Manual page 52

SERVICE MANUAL
Installing a drive wheel hub:
ATTENTION: Danger of injury if the wheels come off!
If the drive wheels are insufficiently attached during assembly, they can come off during
driving.
· Tighten the nuts to 70 Nm when mounting the drive wheel hubs.
· Always use new nuts with undamaged clamping parts.
· Assemble the parts of the wheel hub in reverse order.
· Use a thin film of lubricant to replace the wheel hub on the axle.
52
® ®
Invacare - Bora /Spectra
®
XTR Series