Screw On Position Of The Seat Frame - Invacare Bora XTR Series Service Manual

® ®
Invacare - Bora /Spectra
9.2.3.3

Screw on position of the seat frame

The center of gravity of the seat can be adjusted by mounting the seat frame (1) farther towards the
front or the rear on the seat support (2), see also chapter 9.2.3.2.
If the mobility device is used with drive lock-out choose different screw positions, for example:
Screw on position of the seat frame (1) on the seat support (with drive lock-out)
Screw on position of the seat frame (1) with Flex3 backrest, seat depth 51 cm (with drive
lock-out)
®
XTR Series SERVICE MANUAL
137