Printer Chassis/Feeder Assembly - Xerox Phaser 6250 Service Manual

Printer Chassis/Feeder Assembly

1.
Remove the Imaging Unit and protect it from exposure to light.
2.
Remove the Link Actuator (page 8-32).
3.
Remove the Top Main Cover (page 8-9).
4. Remove the Right and Left Side Covers (page 8-11).
5. On the left side of the printer, disconnect P/J2361 (gray) from the Printer Chassis.
6.
On the right side of the printer, disconnect P/J210 (yellow) from the Printer
Chassis.
7.
Disconnect P/J47 (yellow/blue) from the Motor Driver Circuit Board on the right
side of the printer.
P/J2361
8.
Remove the 8 short screws securing the Printer Chassis (item #1) to the Feeder
Assembly (item #2).
Caution
It is easy to strip the long screws, use caution when removing and replacing.
8-20 Phaser 6250 Color Laser Printer Service Manual
1
P/J47
P/J210
2
6250-141