Xerox Phaser 6250 Settings Manual

Adjusting Printing Options

This topic includes:
■ "Setting Printing Options" on page 2-18
■ "Selecting Print-Quality Modes" on page 2-20
■ "Printing in Black & White" on page 2-21

Setting Printing Options

Many printing options are available with the Xerox printer driver.
Selecting Printing Preferences in Windows
Printer preferences control all of your jobs, unless you overwrite them specifically for your
job. For example, if you want to use automatic 2-sided printing for most jobs, set this option in
printer settings.
1.
Click Start, select Settings, then click Printers.
2.
In the Printers folder, right-click the icon for your printer.
3.
From the popup menu, select Printer Preferences or Properties.
4.
Make selections from the driver tabs. See the "Printing Options for Windows Operating
Systems" table for specific printing options.
5.
Click the OK button to save your selections.
Selecting Properties for an Individual Job (Windows)
If you want to use special settings for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Photo print-quality mode for a
particular graphic, select this setting in the driver before printing that job.
1. With the desired document or graphic open in your application, access the Print dialog
box.
2. Select the Phaser 6250 printer for use and click its Properties button to open the printer
driver.
3. Make selections from the driver tabs. See the following table for specific printing options.
4. Click the OK button to save your selections.
5. Print the job.
Copyright © 2003 Xerox Corporation. All Rights Reserved.
Phaser® 6250 Color Laser Printer
2-18