Static Eliminator Assembly (Pl 6.1.9) - Xerox Phaser 6250 Service Manual

Static Eliminator Assembly (PL 6.1.9)

1.
Remove the Front Cover Assembly (page 8-6).
2.
Remove 1 screw securing both the ground wire and the Static Eliminator
Assembly (item #2) to the Chute Assembly Out (item #1).
3.
Raise the left end up to clear the locator pin and remove the Static Eliminator
Assembly by sliding it to the left.
1
Service Parts Disassembly
2
6250-180
8-55