Ohp Sensor And Harness (Kit) (Pl 9.1.12) - Xerox Phaser 6250 Service Manual

OHP Sensor and Harness (Kit) (PL 9.1.12)

1.
Remove the Chute Assembly Registration (page 8-71).
2.
Remove the 2 e-rings securing the 2 Gears (items #4 & #5) and remove the gears.
Note
When removing the Springs use caution, they spring off the shaft easily.
3.
Remove both springs (item #1 & #6).
4.
Pull out the bearing on the left side of the shaft (item #3).
5
4
5.
Remove 1 screw from the left side of the Chute Assembly (item #8) securing the
Bracket Assembly (item #7).
6. Pull off the black plastic bearing (item #2) securing the left side of the metal
registration roller (item #9) .
Service Parts Disassembly
6
2
3
7
1
8
6250-247
8
6250-248
8-75