Xerox Phaser 6250 Setting Instructions Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. PHASER 6250
  6. Setting instructions manual
Xerox Phaser 6250 Setting Instructions Manual

Xerox Phaser 6250 Setting Instructions Manual

Color laser printer
Hide thumbs Also See for Phaser 6250:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual

Printer Settings

This topic includes:
■
"Accessing the Startup Page" on page 1-14
■
"Accessing Power Saver" on page 1-15
■
"Accessing Intelligent Ready Mode" on page 1-15
■
"Accessing Protected Mode" on page 1-16
■
"Accessing Load Paper Timeout" on page 1-17
■
"Selecting Tray Settings" on page 1-17
■
"Adjusting Front Panel Brightness" on page 1-20
■
"Adjusting Front Panel Contrast" on page 1-20
■
"Changing Printer Language" on page 1-21

Accessing the Startup Page

The printer automatically produces a "Startup Page" each time the printer is turned on or reset.
You can turn off the automatic printing of the "Startup Page" and later print it from the
information pages menu.
To turn on/off the "Startup Page" use either:
■
The printer's front panel
■
CentreWare IS
Using the Printer's Front Panel
To turn on/off the Startup Page:
1.
Printer
Setup, then press the OK button.
Select
2.
Printer
Controls, then press the OK button.
Select
The
Startup Page
3.
Press the OK button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the "Startup Page":
1.
Launch your web browser.
2.
Enter your printer's IP address.
3.
Select Properties.
4.
Click Printer Defaults on the left sidebar of the Properties page.
5.
Select Off or On from the Printer Startup Page drop-down list to change the setting.
6.
Click Save Changes at the bottom of the page.
Copyright © 2003 Xerox Corporation. All Rights Reserved.
is highlighted. The end of the line displays the setting
1-14
Phaser® 6250 Color Laser Printer
(On
or Off).

Advertisement

Table of Contents
loading

Related Manuals for Xerox Phaser 6250

Summary of Contents for Xerox Phaser 6250

  • Page 1: Printer Settings

    Click Printer Defaults on the left sidebar of the Properties page. Select Off or On from the Printer Startup Page drop-down list to change the setting. Click Save Changes at the bottom of the page. Copyright © 2003 Xerox Corporation. All Rights Reserved. 1-14...

  • Page 2: Accessing Power Saver

    Printer Settings Printing the Startup Page To print the “Startup Page”: Select Information, then press the OK button. Information Pages, then press the OK button. Select Startup Page, then press the OK button to print. Select Accessing Power Saver To save energy, the printer enters a Power Saver, low-energy consumption mode after a pre- defined period of time since its last activity.

  • Page 3: Accessing Protected Mode

    Printer Settings Using CentreWare IS To select Intelligent Ready mode or to schedule warmup/standby settings: Launch your web browser. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx). Click Properties. Click Warmup on the left sidebar. Click the Warmup Mode drop-down list and select Intelligent Ready, Scheduled, or Job Activated.

  • Page 4: Accessing Load Paper Timeout

    Printer Settings Accessing Load Paper Timeout When the printer cannot satisfy a print job’s specification for paper tray, type, or size, the front panel prompts you to load the type and size specified in the print job. If you do not load the requested paper within the load paper timeout, the printer picks paper from the default tray.
  • Page 5 Printer Settings ■ 500-Sheet Feeder (Tray 3) ■ 1000-Sheet High-Capacity Feeder (Tray 3 and Tray 4) The printer selects the tray from which to draw paper when: Auto Select, and ■ The front panel paper source is set to ■ The Let printer select which tray to print from option is selected in the printer driver.
  • Page 6 Printer Settings Using the Front Panel To specify the tray sequence: At the printer’s front panel, select Printer Setup, then press the OK button. Paper Handling Setup, then press the OK button. Select Tray Sequence, then press the OK button. Select Scroll to the desired tray sequence.

  • Page 7: Adjusting Front Panel Brightness

    Printer Settings Click Properties. Select Printer Defaults in the left sidebar. Select the tray from the Paper Source drop-down list. Click Save Changes at the bottom of the screen. Note The driver overrides the front panel settings for tray selection. Adjusting Front Panel Brightness To adjust the brightness of the front panel’s background lighting: At the printer’s front panel, select...

  • Page 8: Changing Printer Language

    Printer Settings Changing Printer Language To change the language used for the text on the front panel, CentreWare IS, and some information pages: Printer Setup, then press the OK button. At the printer’s front panel, select Front Panel Setup, then press the OK button. Select Front Panel Language, then press the OK button.

Table of Contents