Table of Contents
Advertisement
3.
Click the Input Audio Level (dB) drop box. A drop down scroll box appears (see figure 65).
Figure 65.
Gain Drop Box
4.
Click and drag the slider or click the scroll up
the desired audio level is visible.
5.
Click the desired gain or attenuation value.
Mute and unmute one or all outputs
Mute one or all outputs as follows:
1.
To select an individual output to mute or unmute, click the Output drop box. A drop
down scroll box appears (see figure 66).
Figure 66.
Output Selection Drop Box
2.
Click the desired output.
3.
Click the
,
Video
Audio
button to select video, audio, or both for
muting. Each mouse click on a button toggles the other two buttons off.
4.
Click the
Mute
or
UnMute
output.
Click the
or
Mute All
outputs.
Observe the Mute status indications on the page.
Unmuted is displayed in green and muted is displayed in red.
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
button or scroll down
, or
Video & Audio
button to mute or unmute the selected
to mute or unmute all of the
UnMute All
button until
109
Advertisement
Table of Contents
