Mute And Unmute One Or All Outputs - Extron electronics CrossPoint 450 Plus Series User Manual

HTML Operation, cont'd

Mute and unmute one or all outputs

Mute one or all outputs as follows:
1.
Figure 6-14 — Output selection drop box
2.
3.
4.
5.
Figure 6-15 — Mute status indications
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
6-16
To select an individual output to mute or unmute, click the Output drop box.
A drop down scroll box appears (fi gure 6-14).
Click and drag the slider or click the scroll up
button until the desired output is visible.
Click the desired output.
Click the Video, Audio, or Follow button to select video, audio, or both for
muting. Each mouse click on a button toggles the other two buttons off.
Click the Mute or UnMute button to mute or unmute the selected output.
Click the Mute All or UnMute All button to mute or unmute all of the outputs.
Observe the Mute status indications on the page (fi gure 6-15). Unmuted is
displayed in green and muted is displayed in red.
button or scroll down