Table of Contents
Advertisement
Example 1: Creating a set of computer video and audio ties
In the following example, input 5 is tied to outputs 3, 4, and 6. The steps show the front
panel indications that result from your action.
NOTE:
This example assumes that there are no ties in the current configuration.
1.
Clear all selections: Press and release the Esc button.
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET VIEW
2.
Select video and audio for the tie: If necessary, press and release the Video button
and the Audio button until the LEDs light.
Press the Video button to toggle on and off.
The LED lights when selected.
3.
Select an input: Press and release the input 5 button.
Press and release the Computer Input 5 button.
COMPUTER INPUTS
2
3
4
The LED lights.
4.
Select the outputs: Press and release the output 3, output 4, and output 6 buttons.
NOTE:
The entire set of ties can be canceled at this point by pressing and releasing
the Esc button. The Esc LED flashes once.
Press and release the Computer/Audio Output 3, Output 4, and Output 6 buttons.
The buttons blink to indicate that the selected computer video and audio input
will be tied to these outputs.
1
2
3
COMPUTER/AUDIO OUTPUTS
5.
Confirm the change: Press and release the Enter button.
Press the Enter button to confirm
the configuration change.
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
ENTER
MPX 866 A Media Presentation Matrix Switcher • Operation
The LED
blinks once.
ESC
I/O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The LED lights when selected.
5
6
7
4
5
6
ENTER
PRESET
The Enter LED blinks to indicate
the need to confirm the change.
25
Advertisement
Table of Contents
