Table of Contents
Advertisement
Return loss
RGB/VGA ................................. <-40 dB @ 5 MHz
S-video/composite video .......... <-30 dB @ 5 MHz
DC offset (max. allowable, S-video or composite video)
External sync (genlock, S-video or composite video)
Video output
Number/signal type
RGB/VGA ................................. 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, component video (b-level or tri-level sync),
S-video/composite video .......... 2 S-video, 2 S-video or composite video, and 2 composite video
Connectors
RGB/VGA ................................. 6 female 15-pin HD
S-video/composite video .......... 2 x 2 female BNC for S-video only (outputs 9 and 10)
Nominal level ................................. 1 Vp-p for Y of component video and S-video and for composite video
Minimum/maximum levels
RGB/VGA ................................. Analog: 0.3 V to 1.5 Vp-p with no offset (follows input)
S-video/composite video .......... Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Return loss
RGB/VGA ................................. -40 dB @ 5 MHz
S-video/composite video .......... -30 dB @ 5 MHz
DC offset
S-video/composite video .......... ±5 mV with input at 0 offset
VGA ........................................ ±10 mV with input at 0 offset
Switching type
RGB/VGA ................................. Triple-Action
S-video/composite video .......... Vertical interval
Sync
Input type (VGA group) .................. RGBHV, RGBS, RGsB, RsGsBs
Output type (VGA group) ............... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Genlock connector ......................... 1 female BNC (video input 9)
Standards ....................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ...................................... 1.9 V to 5.0 Vp-p
Output level ................................... TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Input impedance ............................ 510 ohms
Output impedance ......................... 75 ohms
Max. input voltage ......................... 5.0 Vp-p
Max. propagation delay .................. 30 ns
Max. rise/fall time ........................... 4 ns
Polarity ........................................... Positive or negative (follows input)
Audio
Routing .......................................... 14 x 6 stereo matrix
Gain ............................................... Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................... 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N ................................................. >85 dB, balanced, at maximum output (21 dBu) (unweighted)
Crosstalk ........................................ <-120 dB @ 1 kHz, fully loaded
Stereo channel separation .............. >80 dB @ 1 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Volume range ................................. -76 dB to 0 dB (volume numbers 0 to 64 in 1.0 dB steps)
NOTE: Full attenuation is volume level 0, -76 dB. The default is -0 dB, volume level 64.
1.5 V
0.3 V to 0.4 Vp-p
S-video, or composite video (follows input type)
2 x 2 female BNC for S-video or composite video pass-through (outputs 11 and 12)
2 x 1 female BNC for composite video only (outputs 7 and 8)
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
MPX 866 A Media Presentation Matrix Switcher • Reference Information
121
Advertisement
Table of Contents
