Table of Contents
Advertisement
Command/Response Table for SIS Commands (continued)
Command
ASCII Command
(Host to Unit)
Create ties (continued)
NOTES: • All video and audio group rules apply to all of the tie all commands listed below.
• The ! tie all command for RGB and % tie all command for video can be used interchangeably for ties within the same group.
X!
Tie input to all outputs,
video and audio
Example:
5*!
12*!
Example:
NOTE:
0*! clears all ties.
X!
Tie input to all outputs,
RGB (video) only
Example (see the 2nd
8*&
bulleted Note, above):
X!
Tie input to all outputs,
video only
Example (see the 2nd
10*%
bulleted Note, above):
X!
Tie input to all outputs,
audio only
Read ties
NOTES: • The ! read tie command for RGB and the % read tie command for video can be used interchangeably.
• When the switcher is in verbose mode 1 or 3, the response is Out
X@
Read tied input, RGB output
X@
Read tied input, Video
output
X@
Read tied input, audio
output
Configure input format
X#
Configure input as
composite video
Example:
11*1\
X#
Configure input as S-video
X#
View input configuration
Video mute commands
X@
Video mute
X@
Video unmute
X@
Read video mute status
1*B
Global video mute
Global video unmute
0*B
NOTE:
X!
= Input number (for tie)
X@
= Output number
X#
= Input number
X$
= Input signal format
X%
= Mute status
Response
(Unit to Host)
X!
*!
In
•
In05
•
In12
•
X!
*&
In
•
In08
•
X!
*%
In
•
In10
•
X!
*$
In
•
X!]
&
X!]
%
X!]
$
X#
*1\
Typ
Typ11*1
X#
*2\
Typ
X$]
\
X@
*1B
Vmt
X@
*0B
Vmt
X%]
B
]
Vmt1
]
Vmt0
00 (untied)
01 – 08 for the computer video group
09 – 14 for the low resolution video group
01 – 12 for video
01 – 06 for audio
11 – 14 (the only valid inputs for the "/" command)
1 = composite video
0 = off
MPX 866 A Media Presentation Matrix Switcher • Programming Guide
Additional description
]
All
]
All
Tie input 5 video and audio to all computer
video/audio group outputs only.
]
All
Tie input 12 video to all low resolution
video groups only. Tie input 12 audio to all
computer/audio group outputs only.
]
RGB
Video is broken away.
]
RGB
Tie input 8 RGB to all computer video group
outputs only.
]
Vid
Video is broken away.
]
Vid
Tie input 10 video to all low resolution video
group outputs only.
]
Aud
Audio is broken away.
X!
X#
• In
• (RGB), (Vid), or (Aud)
X!
Input
X!
Input
X!
Input
]
*1
Define input
]
Configurable input 11 is set as composite
video.
]
*2
Define input
Show the configuration of input
]
*1
Mute output
]
*0
Unmute output
Mute all video outputs.
Unmute all video outputs.
2 = S-video
1 = on
]
.
X@
video is tied to output
.
X@
video is tied to output
.
X@
audio is tied to output
.
X#
as composite video.
X#
as S-video.
X#
.
X@
video (video off).
X@
video (video on).
66
Advertisement
Table of Contents
