Table of Contents
Advertisement
HTML Operation
This section describes the operation of the MPX 866 A matrix switcher, including:
z
z
z
z
z
z
z
z
z
z
z
z
The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN,
using a web browser such as Microsoft® Internet Explorer®. The browser display of the
status or operation of the switcher has the appearance of web pages. This section describes the
factory-installed HTML pages, which are always available and cannot be erased or overwritten.
NOTE:
Opening the Embedded Web Pages
Access the switcher using HTML pages as follows:
1.
2.
3.
Opening the Embedded Web Pages
Status Tab
Configuration Tab
File Management Tab
Control Tab
Special Characters
If your Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in your web browser. In Internet Explorer, click Tools > Internet
Options > Connections > LAN Settings, uncheck the Use a proxy server...
box, and then click OK.
Start the web browser program.
Click in the
field of the browser and enter the Matrix IP address.
Address
NOTE:
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) and the name of the file to open.
NOTES: • The
Address
following format:
• The following characters are invalid or not recommended in file names:
{space} + ~ , @ = ' [ ] { } < > ' " " ; : | \ and ?.
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
field of the browser should display the address in the
/{
xxx.xxx.xxx.xxx
optional_file_name.html
}.
96
96
Advertisement
Table of Contents
