Table of Contents
Advertisement
Example 5: Viewing video and audio, audio only, and video only ties
The following example shows the viewing of the video and audio, audio-only, and video-only
ties in the current configuration. The steps show the front panel indications that result from
your action.
NOTE:
This example assumes that you have performed
example
3.
1.
Clear all selections: Press and release the Esc button. The button flashes once.
2.
Select View-only mode: Press and release the View button. The View button lights
red.
3.
Select both video and audio for viewing: Press and release the Video button and the
Audio button.
VIDEO AUDIO
Press the Video button to
toggle on and off.
The LED lights when
selected.
4.
Select an input: Press and release the input 5 button.
Press and release the Computer Input 5 button.
The LED lights.
COMPUTER INPUTS
2
3
4
5
NOTE:
You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
1. Note the number of a lit output button, and then press and release the
output button for an untied (unlit or background illumination) output.
2. Observe that all of the untied outputs light.
3. Then press the output button that you noted previously.
4. Observe that the selected output button, the tied input button (input 5),
and the output buttons light for all of the outputs that are tied to the
input.
I/O
In this example, the Audio LED blinks to indicate audio
breakaway (assuming you have performed example 1, 2, and 3).
Press the Audio button
to toggle on and off.
The LED lights or
blinks when selected.
Until you select an input, the buttons for all untied outputs light.
1
2
3
COMPUTER/AUDIO OUTPUTS
The output buttons for outputs that are tied to input 5 light.
6
7
1
The output buttons for outputs that are not tied to input 5 are unlit.
MPX 866 A Media Presentation Matrix Switcher • Operation
example
1,
example
4
5
6
2
3
4
5
COMPUTER/AUDIO OUTPUTS
2, and
6
32
Advertisement
Table of Contents
