Extron electronics MPX 866 A User Manual page 42

Example 7: Saving a global preset
In the following example, the current configuration is saved as a preset. The steps show the
front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button. The button flashes once.
2.
Select Save Preset mode: Press and hold the Preset button for approximately 2
seconds until it blinks.
Press and hold the Preset button until the
Preset LED blinks.
Release the
Preset button.
2 seconds
PRESET PRESET
3. Select the preset: Press and release the input button for the desired preset.
Press and release the Computer Output 1 button.
The LED blinks to indicate that this preset
number is selected but not saved.
1 2 3
COMPUTER/AUDIO OU
Preset 15 Preset 16 Preset 17
4.
Confirm the change: Press and release the Enter button. The current configuration is
now stored in the selected memory location.
Press the Enter button to
save the preset.
CONTROL
ENTER PRESET VIEW
The Enter and Preset LEDs
return to the unlit state.
MPX 866 A Media Presentation Matrix Switcher • Operation
All input and output LEDs with assigned presets light.
If you then save the configuration to a lit preset number,
the configuration data at that preset location will be overwritten.
1 2
COMPUTER/AUDIO OU
Preset 15 Preset 16
Lit =
Preset Assigned
4
ENTER PRESET
The Enter LED blinks to indicate
Preset 18
the need to save the preset.
The Preset LED continues to blink.
ESC
All input LEDs
return to the
unlit state.
3 4
Preset 17 Preset 18
Unlit =
Preset Unassigned
CONTROL
VIEW ESC
37