Interface Mode - SATO GL4 Series Operator's Manual

Section 3: Configuration and Operation

3.5 INTERFACE MODE

The following settings are available in Interface Mode:
DISPLAY SUB-MENU
Ignore CR/LF
Item No. Check
BCC Check
History Buffer
Comm. Protocol
Status Reply
Host Interface
ETHERN. Port Timeout
ETHERN. Address IP Address
xxx.xxx.xxx.xxx
Subnet Mask
xxx.xxx.xxx.xxx
Gateway
Address
xxx.xxx.xxx.xxx
MAC Address
xxx.xxx.xxx.xxx
DHCP
ETHERN. Setting NetBIOS Proto-
col
ASCII Data Prt
Keep Alive
Timer
Ethernet Speed Auto Select/10 Half or
Page 3-8
RANGE DEFAULT
No/Yes No
Disable/Cancel/ Disable
Resume
Disable/Cancel/ Disable
Resume
Temporary/Permanent Temporary
Standard/Status2/ Status 5
Status3/Status4/
Status5
ENQ/Cycle ENQ
Auto Switching/ Cen- Auto Switching
tronics/ Serial/ IEEE
1284/USB
1-15 Secs. Timeout
Per TCP/IP standard 000.000.000.000
valid address range
Per TCP/IP standard 000.000.000.000
valid address range
Per TCP/IP standard 000.000.000.000
valid address range
Per TCP/IP standard Read-only,
valid address range uniquely assigned
Disable/Enable Disable
Enable/Disable Enable
1025 to 65535 9100
2 - 10 minutes 3 min
Auto Select
Full/100 Half or Full
DESCRIPTION
Appears only if Comm. Protocol is set
to Status 5
Appears only if Comm. Protocol is set
to Status 5
Appears only if Comm. Protocol is set
to Status 5
Appears only if Comm. Protocol is set
to Status 4
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected. Consult your administrator for
the appropriate setting.
Appears only if LAN interface is
selected
Appears only if LAN interface is
selected. Sets the port number for
ASCII print jobs, and must match your
host system setting.
Appears only if LAN interface is
selected. With the time on, the TCP
connection will stay connected even
after the print job has terminated.
Appears only if a 10/100-Base-T LAN
card is installed
GL Series Operator's Manual