SATO GL4 Series Operator's Manual page 51

*Max Cache Mem-
ory
NOTE:
(
HS = Horizontal resolution
VS = Vertical resolution
Average Height = Average
character height (inches)
Average Width = Average
character width (inches
NumOfChar = Number of
Characters to be cached)
*Max Cached Char
(NOTE: HS = Horizontal
resolution
VS = Vertical resolution
Average Height = Average
character height (inches)
Average Width = Average
character width (inches
NumOfChar = Number of
Characters to be cached)
*Standard Chars
*Bold Chars
*Extra Bold Char
*OCR-A Chars
*OCR-B Chars
*Tall Charcters
GL Series Operator's Manual
50 to 2000
01 to 20
0 to 512
0 to 512
0 to 512
0 to 512
0 to 512
Disable/Enable
Section 3: Configuration and Operation
The Maximum Cache Memory
900 Kbytes
option specifies the size of the
memory block that can be allo-
cated to the font cache. The
font cache stores bitmaps that
are created on demand from
the font outlines stored on the
printer flash. The cache allows
the printer to print scalable
fonts at optimum speed.
To calculate the memory
requirement, use this equation:
(HS x VS x Average Height x
Average Width x NumOf Char)/
8
Specifies the size of the largest
01 Kbytes
character that can be stored in
the font cache. To calculate the
memory
requirement, use this equation:
(HS x VS x Average Height x
Average Width)/
This menu entry permits you to
340
adjust the thickness or font
weight of standard text fonts.
This entry permits you to adjust
448
the thickness or font weight of
bold text fonts. This menu will
not take effect unless you save
it in a configuration and the
printer is powered up with that
configuration.
This menu entry permits you to
504
adjust the thickness or font
weight of extra bold text fonts.
Character weight adjustment of
384
resident OCR-A characters.
Character weight adjustment of
304
resident OCR-B characters.
Increases the height of resident
Disable
scalable characters. Enabling
the feature increases the height
by approximately 10 percent.
Page 3-19