SATO GL4 Series Operator's Manual page 50

Section 3: Configuration and Operation
*Optimize&Reboot
Print File List
*Auto Locking
*Set Lock Key
(This lets you
choose different
buttons for
locking or unlocking
the printer menu.)
*Max Font Buffer
Page 3-18
Disable/Enable
Disable/Enable
100 to 1800
Reclaims flash space from
deleted flash files. After press-
ing ENTER, wait for the printer
to reboot.
NOTE: The Optimize feature
will optimize both the Main and
Extd file system (if present).
Prints a summary of the files
Enable
stored in flash memory and
several statistics on
File System usage.
Disable (factory default): The
Disable
ENTER button must be locked
manually. Enable: The printer
automatically locks the ENTER
button five minutes after the
last control panel was used.
Choose any group of keys as
The default lock keys
the new lock and unlock keys
and the ENTER and
that are not already used for
v (down cursor) keys.
another function.
To set the new lock key: At the
°Select a new lock key"
prompt, press the combination
of keys that you want to assign
as the new lock key. Make sure
you press all keys selected at
the same time.
If the selection is valid, the dis-
play will read, ¡°Enter the new
lock key again." If set correctly,
the message °Lock key has
been changed." appears.
The maximum amount of
100 KB
DRAM allocated for download-
ing fonts (True-Type,
Scalable, or Bit Map).
GL Series Operator's Manual