Unpacking - SATO GL4 Series Operator's Manual

SECTION 2: INSTALLATION

2.1 UNPACKING

When unpacking the printer, take note of the following:
The box should stay right-side up.
1
Lift the printer out of the box carefully.
Remove the plastic covering from the
2
printer.
Remove the accessory items from their
3
protective containers.
Note
The following illustrations are representative only. Your printer may not be packed exactly as shown, but
the unpacking steps are similar.
Page 2-4
If the printer was been stored in the
4
cold, allow it to reach room
temperature before turning it on.
Set the printer on a solid, flat surface.
5
Inspect the shipping container and
printer for any sign of damage that
may have occurred during shipping.
GL Series Operator's Manual