SATO GL4 Series Operator's Manual page 21

2.1.2 PARTS IDENTIFICATION (CONT'D)
IDENTIFYING THE MAIN PRINTER PARTS
L I N E
Operation buttons
FUNCTION button: Selects the various setting modes.
CURSOR buttons: Each button moves the cursor up,
down, left or right on the LCD screen.
ENTER button: Confirms the choice of a selection or value.
CANCEL button: Cancels printing data. In each setting
mode, the button also returns you to the previous menu or
menu item.
GL Series Operator's Manual
View of Front Panel
F E E D
LCD screen
Icons, prompts and system messages
are displayed here.
Light Emitting Diodes
POWER LED: Lights up when power is supplied to the
printer.
ONLINE LED: Lights up when communication is available.
Flashes with communication fails.
STATUS LED: Lights up and flashes to indicate exchange of
data.
CANCEL button: Cancels printing data. In each setting
mode, the button also returns you to the previous menu or
menu item.
For details of each indicator's behavior, see Page 5-4 of
Section 5, Understanding the STATUS Indicators.
FEED button
Feeds the label forward. When it is pressed once,
the equivalent of a sheet of paper or label is ejected.
*There are times when the paper is not aligned prop-
erly when power is turned on or when the paper was
set. In this case, always press the FEED button to
align the paper properly.
LINE button
When pressed, it takes the printer ONLINE of
OFFLINE. When certain printer errors occur, the LINE
button can be used to cause the printer to recheck the
error..
The button is also used in conjunction with the cursor
and FEED buttons to navigate menus and confirm the
selection of a menu option.
NOTE: When changing to Online mode, if the operator
has changed menu items, but not saved the changes
in a configuration, the operator will be prompted to
save the changes.
Section 2: Installation
Page 2-9