SATO GL4 Series Operator's Manual page 47

Table of Contents

Advertisement

Poll Character
Poll Response
Idle Response
One Char
Enquiry
Printer Status
Framing Errors
GL Series Operator's Manual
00 to FF
00 Hex
0 to 30
0 ms
Disable/Enable
Disable
Disable/Enable
Disable
Disable, ENQ/STX,
Disable
ENQ
Enable/Disable
Enable
Section 3: Configuration and Operation
This option is for the Series1 protocol.
Whenever the printer receives this charac-
ter, it sends a response to the host indicat-
ing the current state of the printer (see
Series1 protocol).
This option is for the Series1 protocol. After
receiving a poll character, the printer will
wait the poll response time in milliseconds
before sending the response.
This option is for the Series1 protocol.
• Disable (factory default).
• Enable. The printer sends a response
character every two seconds while the
number of valid bytes in the buffer is less
than 75 percent of the buffer size.
The One Char Enquiry mode uses the Poll
Character to detect a request from the host
and sends a response back to the host. .
Printer State
Online and Buffer Not Full
Online and Buffer Full
Offline and Buffer Not Full
Offline and Buffer Full
Disable. Printer status ignored.
ENQ/STX:
Bit
Printer Status
0
Set when the printer is not online
or the buffer is full
1
Set when the printer is offline.
2
Clear during a paper out or Rib-
bonMinder fault
3
Always set
4
Set during a Head Open fault.
5
Set during a buffer overflow fault
6
Set during a parity or framing
error fault
7
Always clear
ENQ:
Bit
Printer Status
0
Set when the label has printed
1
Set when the label is presented
2
Set while the printer is online
3
Always set
4
Set printing in the batch mode
5
Set during a Ribbon fault
6
Set during a Paper Out fault
7
Set during a Head Open fault
These are possible errors that can occur
when serial interface settings of the printer
do not match those of the host computer. If
enabled (factory default), a framing error
causes a fault message to display on the
control panel. If disabled no fault message
will be displayed.
Response (hex)
22
23
20
21
Page 3-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gl4xxe seriesGl408eGl412e

Table of Contents