Selecting The Line For Sending - Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual

Selecting the Line for Sending

You can register the method for selecting the line to use for sending.
NOTE
•
This mode is available only if the optional Super G3 Multi-Line Fax Board is installed.
•
If you select another line for sending on the Send Settings screen or One-touch Buttons
screen, that setting takes priority.
1
Press
➞ [Dual Line Options] under <Fax Settings> ➞ [TX Line
Selection].
2
Select the line to use for sending ➞ press [OK].
<Line 1>:
[Priority TX]: Sends with line 1 if this line is not in use.
[Prohibit TX]: Prohibits sending with line 1. (Line 1 is only used for receiving.)
(Additional Functions) ➞ [Communications Settings]
Documents are always sent with line 2. If line 2 is in use, the
machine waits to send the document.

Selecting the Line for Sending

9
9-55