Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual page 193

2
Select [1 Before], [2 Before], or [3 Before] ➞ confirm the
settings ➞ press [OK].
IMPORTANT
•
If the optional Super G3 Multi-Line Fax Board is installed, the unit name registered
for the line that is selected for Priority TX in TX Line Selection in Dual Line Options
under <Fax Settings> in Communications Settings (from the Additional Functions
screen) is displayed. (See "Selecting the Line for Sending," on p. 9-55.)
•
When [Auto] is selected for <Line Selection>, the user name displayed/printed on
the recipient's machine will be the user name registered for the line which was
used for sending.
NOTE
•
You can change the settings in a recalled send job.
•
If there are multiple destinations stored in Recall memory, the order of the
destinations shown in the list may not correspond to the order in which they were
set.
3
Press (Start).
NOTE
If [Preview] on the Send Settings screen is set, you can verify the images from the
Preview screen before sending your document. (See "Previewing Originals," on p.
5-18.)
5-41
Job Recall
5